H3000 AND H4000 EPABX MODULES

Product Details:

The STMI2 (Subscriber Trunk Module) board provides the interface in an IPDA system (IP Distributed Architecture). The board converts the voice data from the PCM highways into IP data for the 10/100Base-T LAN interface.
The STMI2 HG1500 module binds the HiPath 3800 in the LAN / WAN / VPN network.
The STMI2 module allows the operation of IP phones such as optiPoint 410 & optiPoint 420 and OpenStage (version 8) HFA devices.

Additional Information:

• Item Code: STIM2S30810Q2316X
• Production Capacity: STMI (60 channels)
• Delivery Time: 2/3 days

Product Details:

The SLMA (Station Line Module Analog) board is the interface between the analog stations and the SLMAC24 Card for HiPath 3800. One board contains the trunk for 24 station lines. Each of these trunks contains the required feed, ringing and indication circuitry. The front panel of the board contains an LED, which lights whenever a circuit is busy.

 

Product Details:

• Subscriber Line Module Analogue board
• Provides interface between the system & analogue devices such as
• Announcement recorders
• Dial pulse or DTMF analogue single line telephones
• Fax machines
• Modems
• Paging equipment
• Converts signals from analogue to digital and back
• Generates own ring voltage

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

Ring Generator for Hicom / Hipath System\ RGE Card / S30810-Q2258-X000

Ring Generator for Hicom / HiPath System\ RGE Card / S30810-Q2258-X000

Part number: S30810-Q2258-X RGE

The call generator S30810-Q2258-X generates AC voltages of 65 V or 85 V with frequency of 25 Hz or 50 Hz for the call of the analog subscriber or to the AC selection in cross traffic.

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

ISDN S2M module DIUN2 for HiPath 3800 for connection of up to 30 S2M trunks and digital cross-connections.


ISDN S2M module DIUN2 for HiPath 3800 for connection of up to 30 S2M trunks and digital cross-connections.

Product Details:

Product Details:

Subscriber Line Module Analogue Enhanced card

Used in Siemens Hipath 3800 systems, as a replacement for the SLMAC & SLMA2 boards.

24 analogue a/b interfaces, each with a code receiver to allow full accessibility of all connected devices.

Generates its own ringtone.

Product Details:

Analog Trunk Module (TMANI) For OpenScape Business X8 and HiPath 3800; 8 trunk circuits for analog exchange/central office connections, with CLIP, 12/16 kHz metering and line reversal detection. No on-boardPFT relay (ALUM).

Unify Analog Trunk Module – TMANI (L30251-U600-A598) 

The Unify Analog Trunk Module – TMANI (L30251-U600-A598) is also known by the alternative code: S30810-Q2327-X.

The Unify Analog Trunk Module (TMANI) is compatible with OpenScape Business X8 and HiPath 3800. Features include 8 trunk circuits for analog exchange/central office connections, with CLIP, 12/16 kHz metering and line reversal detection. No on-board PFT relay (ALUM).

 

Product Details:

The STMI2 (Subscriber Trunk Module) board provides the interface in an IPDA system (IP Distributed Architecture). The board converts the voice data from the PCM highways into IP data for the 10/100Base-T LAN interface.

The STMI2 HG1500 module binds the HiPath 3800 in the LAN / WAN / VPN network.
The STMI2 module allows the operation of IP phones such as optiPoint 410 & optiPoint 420 and OpenStage (version 8) HFA devices.

Additional Information:

• Item Code: S30810-Q2316-X100
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 7 DAYS

Product Details:

Product Details:

• Line Trunk Unit Control Advanced.
• This card is used in HiPath 4000 system
• Interface between control unit to LTU unit.

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

Analog Subscriber Line Module (24 a/b) SLMAV24 for HiPath 3800 (with CLIP)

Siemens SLMAV24 (S30810-Q2227-X200) 

 

The Siemens SLMAV24 (S30810-Q2227-X200) is an Analogue Subscriber Line module for the Hipath 3800 system.

 

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

The SLMAV Module For Hipath 4000 is a Subscriber Line Module analogue extension card with MWI for the Siemens Hipath 4000 system.

Additional Information:

• Delivery Time: 7 days
• Packaging Details: Boxed

Product Details:

• The Siemens STMIX HG 3500 V8, 120 Channels (Subscriber Trunk Module IP extended) card is the next generation of STMI4 and STMI2 cards.
• The V.24 service interface on earlier STMI cards has been replaced by a USB connection.
• The capacity of the new card is 120 channels.
• starting at OpenScape 4000 V8.0
• S30810-Q2343-X STMIX
• L30220-Y600-T414

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: BOXED

Product Details:

• Automated attendant (AutoAttendant)
• MoH if HiPath 3000 V4.0 R7.f.h or later is used.
• Voice store and forward
• Message Waiting Indication (MWI)
• Outcalling (external notification of voice message receipt)
• Company and personalized customization greetings
• End user and Guest
• Multiple language support (choice between twelve different languages)
• Chose of up to 3 Language
• User password
• Detailed reports for administrators and end users
• System backup and restore

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

The subscriber trunk module STMI 2 Module For Hipath 4000 is a interface board for the HiPath 4000 in a IPDA (IP Distributed Architecture) System. The STMI board converts the speech data of the PCM highways into IP data for the 10/100 Base-T LAN interface.

 

The STMI board integrates the following central and peripheral functions:

• 10/100 Base-T Fast Ethernet network access, comparable to HiNet CG2500
• 10 Base-T Fast Ethernet network access (reserved for future use)
• DSP based voice coder functions, comparable to HiNet CG2500
• STMA2 compatible backplane Interface

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

A Main Distribution Frame (MDF) is a signal distribution frame or cable rack used in telephony to interconnect and manage telecommunication wiring between itself and any number of intermediate distribution frames and cabling from the telephony network it supports.

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

Expansion Module 4/0 - 04 Analog Lines *  Hipath 1130/1150/1190 *

 

•  Hipath 1130/1150/1190 Expansion Module

04 Analog Lines

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

• IVML8 (S30122-Q7380-X100) Voicemail card
• Voicemail board for Hipath 3750, Hipath 3700 & Hipath 3550 systems
• IVM module is a an optional standard module for the Hipath 3000 system. It is housed internally within the system
• 8 channels (ports)
• 20Gb hard drive - can store up to 100 automatic attendant mailboxes & up to 100 information mailboxes

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: BOXED

Product Details:

Product Details:

• Data processor and serial channel extended board
• Carries out basic system switch functions, as well as ADP processing, including control of the SCSI bus
• Incoming tone processing
• Conference bridging
• System clock control
• HDLC/VXDX termination
• Ethernet LAN interface
• CPU Pentium AMD for system control
• SIPAC connectors

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

Backplane for HiPath3800 / OS Biz X8 Expansion Box / S30804-Q5393-X

Product Details:

SLC 24 for DECT connectivity

Additional Information:

• Item Code: S30810-Q2193-X200
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 7 DAYS

Product Details:

Siemens Clock Module Small (CMS Module) for DECT with SLCN and for networking

• For Cordless connection applies: HiPath 33xx / 35xx, the CMS is required for Direct connection of UP0 / E only one base station with max. 2 user channels (royalty free).
• In HiPath 3550 in conjunction with the SLC16N and HiPath 3800 in conjunction with the SLCN.
• Can also be used for HiPath 500th

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

IVMS8 (L30251-U600-A605) Voicemail card Voicemail board for Hipath 3750, Hipath 3700 & Hipath 3550 systems IVM module is a an optional standard module for the Hipath 3000 system. It is housed internally within the system 8 channels (ports) 20Gb hard drive - can store up to 100 automatic attendant mailboxes & up to 100 information mailboxes

Product Details:

EB204 (S30817-H844-A401) with two analog trunk lines and four analog telephone ports with CLIP.

Additional Information:

• Delivery Time: within seven working days
• Packaging Details: BOXED

Product Details:

The HDCF assembly with compact flash card slot.

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED AS NEW

Product Details:

Product Details:

• VoIP gateway board for the Hipath 3350 & Hipath 3550 systems
• Provides connection of: Local LAN to the Hipath 3000
• External LAN over the ISDN & DSL interfaces of the Hipath 3000
• Supports: Function of ISDN & DSL router
• Function of a media gateway for transfer of voice, fax & data
• Forwarding of conversations between IP based networks (such as LAND, intranet & internet) & circuit-switched networks (such as ISDN & PSTN)

Product Details:

Siemens HiPath 3800 / HiPath 4000 / OS Biz X8 cable DIUN2 Cable / DIUT2 Cable

NEW Item

Manufacturer Part Number: L30251-U600-A444

cable 20m for DIUN2 ISDN CORNET Cable S2M Connecting Cable

Compatible with:

H3800

OSBiz X8

Product Details:

Siemens HiPath 3800 / HiPath 4000 / OS Biz X8 MDF Cable


24 Pair MDF Cable For Hipath 3800 / X8 / Hipath 4000 / 20M - 25M (SIVAPAC-OPEN)
20Mtr - 25Mtr CABLE 

Additional Information:

• Delivery Time: 7 days
• Packaging Details: Boxed

Product Details:

The SLMO2 Card is a relevant part of the Siemens HiPath 4000, which is an innovative solution that is reliable, stackable, and modular tool for seamless expansion.

 

It is used for connecting the following:

• Analog Subscriber Telephones
• Fax Machines
• Answering Machines
• PA Systems
• Amplifiers for Entrance Telephones
• Announcement Unites
• Voicemail Systems

Product Details:

Siemens S30810-Q2923-X-000-05 16SLA Analogue Subscriber Module for Hipath 3350 & 3550 System.


Card with 16 analogue extension ports

Product Details:

Siemens 8SLA 8 Analogue Extension Cards for Hipath 3350 & Hipath 3550 System.

Expansion module 8 analog a/b ports for analog participants such as FAX, MoH, door intercom, etc.

Part number: S30810-Q2925-X-5

Compatible with telephone systems: Siemens HiPath 3350 / 3550 

Product Details:

Product Details:

• Digital Interface Unit ISDN Module for Hipath 4000, Hicom 300, Hicom 300E & Hicom 300H systems
• 2 Primary Access (PMA) interfaces
• 2/4 line interfaces (ports)
• To public and private E1 network subscribers
• Via PCM highway (old or new)

Product Details:

Provides 8 additional digital extensions for the connection of Siemens Optiset or optiPoint digital phones on the following systems.

 

Product Details:

• Hicom 118 (will not work on Hicom 112)
• Office Point all versions
• Office Com all versions
• HiPath 3350 all versions up to V8
• HiPath 3550 all versions up to V8

Additional Information:

• Delivery Time: 7 days
• Packaging Details: Boxed

Product Details:

CMA (Clock Module ADPCM) for DECT connection (Direct Base Station Connections) For OpenScape Business X3/X5 and HiPath 33xx/35xx. The CMA module includes all the functions of the CMS (Clock Module Small). The CMA is required for OpenScape Business X3/X5 and HiPath 33xx/35xx systems with Cordless with direct base station connections to special UP0/E ports, if more than 2 base stations are connected or one base station is connected with more than two b-channels.

Product Details:

The Siemens TS-2 ISDN30 Card is a primary rate ISDN card, it provides of up to 30 channels of ISDN to your existing HiPath 3550 telephone system.

FEATURES

• TS2 (S30810-Q2913-X300)

• ISDN30E PRI card

• Trunk Module S2M for Hipath 3500 & Hipath 3300 systems

 

Product Details:

Siemens HiPath 3550 4SLA 4 port Analogue Extension Card The 4SLA (Subscriber Line Analogue) allows you to connect up to 4 analogue a/b extension.

Product Details:

24 Pair MDF Cable For Hipath 3800 / X8 / Hipath 4000 / 20M - 25M (SIVAPAC-OPEN)
20Mtr - 25Mtr CABLE 

Additional Information:

• Delivery Time: 7 Days
• Packaging Details: Boxed

Product Details:

The STMD2 (Station/Trunk Module Digital S0+SLMS2 Station Line Module Digital S0) board is a subscriber card for SLMS2 function (with power feeding).
The STMD2 board comprises the STMD and SLMS function on one single board. The STMD2 covers all features which are provided by the replaced modules. It contains eight trunks with S0 interfaces. Each S0 connection (4-wire-system) constitutes a basic access with two B-channels (64 kbits/s each) for speech/data and a D-channel (16 kbits/s).
Description of STMD/SLMS modul:
Moreover the new boards use SIPAC connector to the backplane.The front panel of the board contains 2 LEDs.

Additional Information:

• Delivery Time: 7 DAYS
• Packaging Details: Boxed

Product Details:

The DIUS2 (Digital Interface Unit ISDN) implements two S2 primary rate access (PRA) interfaces in the Hicom 300 system according to CCITT:

• Receive path for PRAs 0 and 1. Transmission rate: 2048 kbit/s, coding: HDB3
• Send path for PRAs 0 and 1. Transmission rate: 2048 kbit/s, coding: HDB3.
• Signalling comprises 30 B-channels, 1 D-channel and 1 synchronization channel per path

The digital DIUS2 board is used for connections to public ISDN networks and for networking Hicom systems.

Interface:
The DIUS2 (S2 interface for 4-wire line) is installed in the LTU in a peripheral board slot with an uneven number, since the slot immediately adjacent to it is also used.

S2M = Exchange trunk connection Da2M = digital tie-line (public network) S2 = digital tie-line (private networks) for connection to HOST, SERVER, GATEWAY.

For failure protection reasons, the two links on the same board should not be routed to the same partner. The range is 6 dB (approx. 240 m).

The transmission bandwidth is 2 x 2048 kbit/s (2 HWYs). Each HWY consists of 30 user channels (B-channels), one signalling channel (D-channel) and one synchronization channel with 64 kbit/s each.

Integrity counters maintain statistics for layer 2 protocols on the S0/S2 interface. The statistical data can be interrogated via AMO BSSU.

The DIUS2 processes the signalling data (s-data) of the D-channel. The DIUS2 provides a reference clock for the clock generator; this clock is obtained from one of the two link signals. For this purpose, the reference clock table must be assigned according to the network topology (AMO REFTA).

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

• Expansion card with 0 Trunks / 12 user Extensions
• Works with HiPath 1150 and HiPath 1190 PBX

Product Details:

• STMD3 (S30810-Q2217-X10)

• Digital SO module card for the Hipath 3800 system

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 7 DAYS