DIGITAL SUBSCRIBER CARD

Product Details:

Analog Subscriber Line Module 24 Ports (SLMAV24N), for OpenScape Business X8

• 24 analog subscriber ports with CLIP support (feature for displaying caller's telephone number on a subscriber's telephone).
• For connecting analog subscriber telephones, fax machines, answering machines, PA systems, amplifiers for entrance telephones / intercoms, announcement units, Voice Mail systems.
• Can be used for remote, outdoor extensions.
  Mixed configurations of SLMA8 / 24 (44V ring with CLIP ) and SLMA24 (75V ring without CLIP ) are possible For EMC reasons, a front face plate is also required. Can be connected from OpenScape Business V1.
  Hint: The breakdown is shown completely.

consisting of:

1 S30810-Q2227-X400 SLMAV24N
Product Usage:

Core OpenScape Business V1
-> OpenScape Business V1 config
-> OpenScape Business V1 not config

Additional Information:

• Item Code: S30810-2227-x400
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Subscriber Line Module Optiset SLMO8N 8 OpenScape X8 UP0 / E interfaces - HiPath 3800

Siemens telephone system:

• Siemens HiPath 3800

• Unify OpenScape Business X8

Digital Subscriber Line Module (SLMO8N) 8 × UP0 / E for OpenScape Business X8. For connecting UP0 / E telephones and terminals and HiPath telephone solutions. For EMC reasons, a "front face plate" is also required. The card provides 8 ports.

Digital Subscriber Line Module (SLMO8N)
8 × UP0 / E for OpenScape Business X8
For connecting UP0 / E telephones and terminals and HiPath telephone solutions
For EMC reasons, a front face plate is also required. The card provides 8 ports for a total or 16 B channels.
Hint: The breakdown is shown completely.

consisting of:

1 S30810-Q2168-X300 SLMO8N
Product Usage:

Core OpenScape Business V1
-> OpenScape Business V1 config
-> OpenScape Business V1 not config

Additional Information:

• Item Code: S30810-Q2227-X300
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

SLMU is the successor of the SLMO24N and the SLMO8N .
SLMU together with CMAe  is the successor to the SLCN .

The SLMU is supported from the OpenScape Business SW Version V2R3.
For EMC reasons, the "front panel cover" is also required. The module has 24 ports with a total of 48 B channels.

The SLMU card offers:

• 24 UP0E interfaces for connecting "TDM" system telephones.
• Support of all TDM system phones that are currently released for OpenScape Business.
• Support of the master / slave mode as currently with the SLMO24N / SLMO8N modules.
• Simultaneous operation in combination with SLMO24N and SLMO8N cards within an OpenScapeBusiness X8 system
• Upgrade possibility to the "Cordless" SLMUC card by attaching a CMAe module.

Support the SLMUC card

The SLMUC (Subscriber Line Module UP0 Cordless) card consists of the SLMU card and a CMAe module .

The SLMUC card:

• Connection possibility of up to 16 DECT base stations BS5 or BS4 per SLMUC card.
• 16 UP0E interfaces for direct connection of base stations plus 8 additional UP0E interfaces to increase the number of simultaneous calls per base station.
• Support for a maximum of 48 simultaneous calls per SLMUC
• Simultaneous operation of SLMUC and SLCN cards in one system.
• Support of the same operating modes as the SLCN card in single and multi node systems.
• Support for all currently released Cordless (DECT) phones
• Maximum values ??????per OpenScape Business X8 system
• Max. 4 SLMUC and / or SLCN assemblies
• Max. 192 simultaneous calls
• Max. 64 base stations

INFO:

• Each SLMUC card requires a CMAe module as of issue 4
• The new SLMU module in conjunction with the CMAe module temporarily only supports line lengths of up to 800 meters between the SLMU and the base stations.
• An 8-channel module will no longer be available in the future.
• For OpenScape Business systems with SW version V1, an upgrade to SW version V2 is required for extensions with SLMU modules.
• The operation of the phased out BS3 base station is technically not prevented.

In case of problems with BS3, these are to be exchanged for base stations from the current portfolio.

• Mixed interfacing of base stations and TDM phones to an SLMUC is not supported.

Scope of delivery: 1x S30810-Q2344-X100 SLMU module

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The Subscriber Line Module, U/P0/E Interface, SLMO24 Board has 24 UP0/E-Interfaces.

• for connection of UP0 / E telephones and HiPath telephone solutions
• On the board are 24 ports with a total of 48 B-channels. For EMC reasons, the "filler panel front" is also required.

Additional Information:

• Item Code: S30810-Q2168-X10
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The STLS4 is a board with 4 S0-interfaces, that can be run as external network interface in TE-mode or alternatively as internal S0-interface (Bus PMP) in NT-mode.

The board is for the:

• Hicom 150E
• OfficeCom/ Point,
• HiPath 3350/3550, and Octopus E20/E30.

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed