Hexa Communications Private Limited

 STMD2 (Station/Trunk Module Digital S0+SLMS2 Station Line Module Digital S0) board comprises the STMD and SLMS function on one single board. The STMD2 covers all features which are provided by the replaced modules. It contains eight trunks with S0 interfaces. Each S0 connection (4-wire-system) constitutes a basic access with two B-channels (64 kbits/s each) for speech/data and a D-channel (16 kbits/s)

• Moreover the new boards use SIPAC connector to the backplane. 
• The front panel of the board contains 2 LEDs.

Subscriber Trunk Module (with S30807-Q5697-X300-2) for Siemens Hipath 4000, AP 3700  Epabx System

The TM2LP-module board S30810-Q2159-X150 (Universal analog trunk module) is a  networking-module with eight analogue interfaces, which operate according to the loop-process.

• Outgoing traffic: direct
• Incoming traffic: via attendant console (HKZ), direct dialing (DID)
• Two-way traffic
• Telecommunication signaling process: IWV, MFV and MFC-R2 (configuration per set)

Specifications:

• Same functionality as the previous generation module board
• 8 Ports per module board
• Fine protection on the module board
• SIPAC-back plane plug
• 50 Hz charging meter / message accounting

Compatible to the following systems:

• Hicom 300E starting at software version EV2.0
• Hicom 300H
• HiPath 3800
• HiPath 4000
• OpenScape 4000

Unify OpenScape Business X8 V2 System Box (L30251-U600-G648) 
The Unify OpenScape Business X8 V2 System Box, product code: L30251-U600-G648, is also known by the alternate part code: S30777-U778-X.
The Unify OpenScape Business X8 V2 System Box (L30251-U600-G648) includes:-
– SDHC card with software
– Mainboard and power supply
– Including 2 LUNA2 power supply units
– 9 slots for optional system cards
– 2 GigE LAN ports (customer LAN, Service)
– 1 GigE WAN port (direct internet access)
– 1 USB port (Service)
– WITHOUT mains

OpenScape Business X3W & X5W are communication systems which can be wall mounted.

OpenScape Business X3W includes a board shelf with three slot levels, which are equipped as follows:

• Slot level 1: slots for two peripheral boards
• Slot level 2: slot for the OCCM mainboard
• Slot level 3: slots for five options

OpenScape Business X5W includes a board shelf with six slot levels, which are equipped as follows:

• Slot levels 1 through 3: each slot level provides slots for two peripheral boards
• Slot level 4: slot for the OCCM mainboard
• Slot level 5: slot for a peripheral module in SIPAC format
• Slot level 6: slots for five options

Unify OpenScape Business X3W - X5W = Telekom Octopus F X3W - X5W

The connection of telephones, CO trunks, etc., can be made directly at the boards or via an external main distribution frame. The back of the board frame has the UPSC-D, which integrates the functions of a power supply and a battery manager. No further components are required for permanent AC power supply operation. To maintain short-term battery emergency operation after a power failure, that is, to use uninterruptible power supply functions, you must also connect the OpenScape Business Powerbox.

The SLMA2 (Subscriber Line Module Analog) fully provides 24 analog subscriber lines and supports all functions of (on-line) analog telephone sets. The SLMA2 provides upgraded functionality from the SLMA2 board. The SLMA2 is compatible with the SLMA. In additon, with the aid of a SIPAC/SIVAPAC adapter, the SLMA2 can also be used in an LTU shelf without any modifications to existing hardware.

However, the system software must be upgraded to V3.5. Any of the 24 lines can be connected to any of the 128 time slots available in the LTUE-shelf.

• Overvoltage protection
• Ringing the line
• Supervising and signaling the line
• Codec function
• Hybrid function 2W to 4W and 4W to 2W
• Test (loopback) capability

• SLMO24 — stands for Subscriber Line Module Cost Optimized (24-port). 

• Part Number: S30810-Q2901-X (“-6”, “-9”, etc. are revision/variant suffixes). 

• Purpose / Role: It is a line-interface module that provides 24 ports for subscriber (extension) lines — specifically for analog / “UP0/E” or digital endpoints in certain system environments. 

The Siemens HiPath 3550 V9.0 telephone system is for wall mounting, a modern PBX system for small and medium businesses.
Real-Time IP system, ideal for 8 to 20 users, and also supports all necessary digital and analogue interfaces. Interactive user prompting via display and dialogue keys on optiPoint handsets provides for quick and easy activation of features.
The telephone system HiPath 3550 for OpenStage and OptiPoint phones with following basic configuration:
Base-Box-Kit composed of:

1x Systembox (wall mounting)

1x Processor board CBCC for HiPath 3550

1x EVM-Voicemail board

1x PSUP (Power Supply)

Software with MMC V9.0

Interfaces:

2x ISDN (S0)

8x Digital (UP0/E)

4x Analog (a/b)

Hernia Meshes for laparoscopic hernia & open hernia from Covidien /medtronic Pco15fxPco205fxPco1510fx Contact for bulk enquirer

DSCXL2+ S30122-X8004-X39 V3.1 for HiPath 4000

The DSCXL (Data and Switch Processor for CompactPCI/LAN) is the main processing-board for the HiPath 4000. The module-board provides the ADP-Processing (as well as the control of CompactPCI-Busses in the backpanel) and is responsible for fundamental System-control-functions

New Features for HiPath 3000 V9

• OpenScape Office HX to connect to MX/LX networks

• Enhanced features of OpenScape Office V3

• Network-wide unified communications (presence, call status, instant messaging, directory...)

• SIP attack protection

• Enhanced remote administration: SSDP support via Shiva Plug

• optiClient Attendant call park improvements

• HiPath Cordless user enhancements incl. MWI indication

Capacity:

• Up to 16 channels (ISDN, loop start, IP)

• Entry Voice Mail module

• Up to 24 digital subscribers

• Up to 96 IP work points

• DECT solution with up to 3 base stations and 16 handsets
• wall mountable
• ISDN2e and analogue lines
• Attendant PC (pc operators console)
• CSTA interface (computer supported telephony applications for access to call view etc.)
• CTI Tapi interface
• remote maintenance (via built in ISDN modem or optional analogue modem)
• admin via TCP/IP (optional module)
• internal or external music on hold modules (optional)
• analogue and digital voicemail interfaces
• Max Corded Extensions: 44
• Max Cordless Extensions: 16
• Max IP Devices: 96
• Max Trunks: 16
• Number of Universal Card Slots: 2

Maximum Capacities*

The SLMU card offers:

24 UP0E interfaces for connecting "TDM" system telephones.

Support for all TDM system phones currently released for OpenScape Business.

Support of the master / slave mode as currently with the SLMO24N / SLMO8N modules.

Simultaneous operation in combination with SLMO24N and SLMO8N cards within an OpenScapeBusiness X8 system

Upgrading to the "Cordless" SLMUC card by attaching a CMAe module.

• Enhanced in house and campus mobility
• Feature scope comparable to that of a corded system telephone
• Leverages existing infrastructure
• Excellent voice quality
• Convenient operation
• Encryption/decryption in accordance with the DECT standard
• Illuminated keypad, programmable emergency button
• Signalling of new messaes through illuminated MWI key
• Handset lock with 4-digit PIN code
• Charging in power off mode
• Menu promts in 19 languages and graphical display with icons
• Missed appointments list
• VIP call signalling
• Enhanced functionality with hiPath DAKS
• Multi-cell capability

Description

• Module 2/6 of Hipath 1150 and 1190 Siemens

• With 02 Trunks and 06 Analog Extensions USED

Mainboard OCCLA Advanced System X8

• OpenScape Business X8 Mainboard OCCLA
• 2 x Gigabyte LAN connections (customer LAN, service)
• 1 x Gigabyte WAN connection (Internet direct)
• 2 x USB 3.0 port