Hexa Communications Private Limited

• Voicemail board for Hipath 3800 system
• IVM module is a an optional standard module for the Hipath 3800 system. It is housed internally within the system
• 20 Gb hard drive - can store up to 100 automatic attendant mailboxes & up to 100 information mailboxes

Analog Subscriber Line Module 24 Ports (SLMAV24N), for OpenScape Business X8

• 24 analog subscriber ports with CLIP support (feature for displaying callers telephone number on a subscribers telephone).
• For connecting analog subscriber telephones, fax machines, answering machines, PA systems, amplifiers for entrance telephones / intercoms, announcement units, Voice Mail systems.
• Can be used for remote, outdoor extensions.
  Mixed configurations of SLMA8 / 24 (44V ring with CLIP ) and SLMA24 (75V ring without CLIP ) are possible For EMC reasons, a front face plate is also required. Can be connected from OpenScape Business V1.
  Hint: The breakdown is shown completely.

consisting of:

1 S30810-Q2227-X400 SLMAV24N
Product Usage:

Core OpenScape Business V1 & V2
-> OpenScape Business V1&V2 config
-> 

Manufacturer Part Number: S30810-Q2324-X11

For HiPath 4000

• Gateway unit for a local system connected to a distributed PBX system
• Controls all peripheral boards in the local system
• Provides access to the 10/100 Base-T Ethernet network
• Communicates with the common control system unit over the Ethernet network

Provides:

• An interface for up to 16 peripheral boards in the LTU shelf
• An interface to support a 19" system

4 trunk circuits for analog exchange/central office connections without PFT(ALUM), with CLIP, 12/16 kHz metering and line reversal detection

• HiPath 3300
• HiPath 3500
• OpenScape X3R
• OpenScape X5R
• S30810-Q2953-Z
• 12 month exchange warranty
• Nationwide delivery installation and programming available

• For OpenScape Business X8 and HiPath 3800;
• For connecting base stations are 16 SLCN ports.
• A base station can be connected with max 3 ports.
• Pro wired port are max. 4 simultaneous calls possible.
• 128 mobile phones are possible per SLCN. In addition, a further assembly is required.
• In total only 250 MT to 4 SLCN can be operated.
• On the board there are 4 ports with max. 64 B-channels.
• Max. 4 modules per box and system are allowed in the OSBiz X8 and HiPath 3800.
• The EIC identifier (DECT ID) DUA395 must once per system, during initial startup ordered

U P0E-interfaces for system specific telephones for long distance

S 0-interfaces for long distance