EPABX SPARE PARTS

Product Details:

The RTM (Rear Transition Module) board is implemented in the Compact PCI architecture in HiPath 4000 Siemens Communication Server and forms the interface between the central processor board (DSCXL) and the peripheral LTU shelf. This board offers the same functions as its predecessor DSCX as well as the following improvements.

• It is integrated in the CompactPCI system
• It supports up to fifteen LTU shelves
• It replaces the existing LTU cables with standard CAT5, 8-pin, shielded cables, (RJ45)
• It provides a LAN-based interface to the DSCXL over the backplane.

The RTM board consists of the following interfaces:

• Compact PCI backplane with:
• Power supply
• System clocks
• Slot addresses
• Control signals between partner boards
• LAN 10/100Base-T (direct connection over the backplane to the DSCXL board)
• LTU 15 x RJ45 each with 32 Mbps (each of which has 1x HDLC channel with 2 Mbps and 4x PCM64s (256 B channels per LTU, max. 3840 B channels)
• V.24 9-pin SUB-D connector (service connector)
• Displays (LED)

The RTM board receives +3.3 V from the systems backplane. The power supply voltages required for the various circuits on the RTM board are generated by the DC/DC voltage converter.

A Hot Swap Controller monitors the local voltage levels and disables the board:

• When 2.5 A power consumption exceeds 20us
• Immediately when 7.5 A is reached
• In the case of critical voltage underflow; once disabled, the board automatically attempts to perform a reset after approximately 1.5 s.
• When the board is plugged in and unplugged.

The board can plugged in and unplugged during live operation

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

BS4 for using for DECT technology

The Access Point 3700 IP is a 19 "frame for HiPath 4000 systems with 9 slots and additional installation space for CSAPE plug-in as an IPDA framework with an emergency option. The HiPath 4000 IP Distributed Architecture offers the possibility to distribute Acces Points to other sites via an IP Infrastructure

Product Details:

Repair and service of Siemens Hipath 3800 system and modules /Siemens Openscape X8 system & modules

Product Details:

Interalia XMU+, Digital message on hold Announcer & Line Card´s

Product Details:

An SLMAC board interfaces between the system and analog devices. These boards convert signals from analog-to-digital and from digital-to-analog. They support the following analog devices:

• Announcement recorders
• Dial pulse or DTMF analog single-line telephones
• Fax machines
• Modems
• Music-on-hold equipment
• Paging equipment

The SLMAC board provides 24 analog channels. This board can receive instructions from the operating system through the LTUCX board. It supports a line loop resistance of 1000 Ohms, which includes the resistance of the terminal equipment. It allows stations to be 2.6 cable kilometres (1.6 cable-miles of #26 American Wire Gauge [AWG] cable) from the system.

The SLMAC board generates its own ringing voltage and does not require an external ring generator. It supports V.90 (56K) modems with data transmission rates up to 50 kilobits per second (Kbps)

The SLMAC board has SIPAC shelf connectors.

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

• Easy and cost-effective migration path to 802.11n
• Comprehensive wireless security services for authentication, encryption, IPS, and NAC
• Flexible architecture supports centralized and/or distributed traffic forwarding for voice/video/data applications
• Policy enforcement and rate limiting at the AP support diverse deployments
• Unified wired/wireless role-based access control with guest networking

Additional Information:

• Production Capacity: As per stanadard
• Delivery Time: 5 days
• Packaging Details: Boxed

Product Details:

The SIUX (Signaling Unit) board for Hicom 300/300E, replaces the SIU board in the central and peripheral system shelves.
The signaling unit SIUX is used to supply the system with audible tones, announcements and music on hold.
In addition, it contains dial tone receivers, DTMF receivers, a test generator and a test receiver. The parameters for the different generator and receivers can be loaded during operation. The announcements can be stored directly on the SIUX.
As part of the service unit (SU), the SIUX is installed in the CCS common control shelf.
As a DTMF/MFC receiver, the board can be installed in any desired peripheral board slot of the SWU.

In the service unit, the SIUX has the following functions:

• Tone generation
• Audible tone receiver
• DTMF receiver
• Voice announcements
• Music on hold
• Test generator/test receiver

In the SWU, the SIUX has the functions:

• 8 DTMF tone receivers/generators or 8 MFC tone receivers/generators

Country-specific adaptions are implemented by means of different loadsware variants, which are loaded when the board is put into service.
The new loadware solution means that only one SIUX hardware variant is necessary.

Additional Information:

• Delivery Time: Within seven Working days
• Packaging Details: Boxed

Product Details:

The S30810-Q2956-X200-8 SLAD8 is an 8 Circuit Digital Extension Card designed to fit the Siemens HiPath 3350 & 3550 Phone Systems. The SLAD8 offers 8 analog interfaces with CLIP function. All conventional telephones and accessories such as a Fax, can be connected.

Features:

• 8 cct
• Clip Function

Compatibility:
Siemens HiPath 3350/3550 Version 7.0 Phone Systems

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

The STLSX4-module board S30810-Q2944-X with two S 0-interfaces is the compatible next-generation module board for the STLS4 S30817-Q924-A313. The basic connections can be used as external trunk-lines or as internal S 0-interfaces. Only terminals with a local power supply can be connected to the internal S 0-interfaces.

Compatible with the following systems:

• HiPath 3350
• HiPath 3550
• OpenScape Business X3W
• OpenScape Business X5W

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Analog subscriber module 24 ab SLMAE for HiPath 3800 (S30810-Q2225-X200)

the ringing voltage until: 73V 

ringtone voltage: 65V

with CLIP

no external ring generator required

Power saving mode by switching off the power supply possible

The following modules are replaced by the SLMAE2:

SLMAC (S30810-Q2191-C)

SLMA2 (S30810-Q2246-X)

CLIP displays the callers number in special CLIP-capable analog devices; 
for connection of:

analog phones,

fax,

answering machines,

Speakers, 

Doorphone amplifiers, 

Announcement devices 

voicemail

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: BOXED

Product Details:

for HiPath 4000

NCUI2 (60 channels)

The Control Unit IP HiPath HG 3575 (NCUI) board is the main central control for the IPDA and gateway unit in a local system as part of a distributed PBX.

A local system may be an LTU shelf or 19-inch boxes. It controls all peripheral boards in the local system, comparable to the LTUCE board in a peripheral shelf, and has access to the 10/100 Base-T Fast Ethernet Network.

The NCUI performs central functions like DCL-LP, SIU, CONF, MTS and CG. The board has the interface up to 16 peripheral cards in the LTU shelf and in addition an interface to support the 19-inch system.

The board communicates with the common control function in the HiPath 4000 by means of the Ethernet network.The NCUI has switching capability of up to 256 time slots on 8 highways with 2.048 Mbps each within the local system. A subset of up to 30 time slots may be switched to external traffic over the IP network.

Additional Information:

• Delivery Time: within seven working days
• Packaging Details: Boxed

Product Details:

BS4 is a DECT Base Station comes standard with two voice channels. It is suitable to used for Hipath and Hicom telephone systems. A Grade - Excellent condition. This phone has been sanitized and professional refurbished.

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

• SLAD16 module board for the Siemens Hipath 3350 & 3550 systems
• 16 analogue interface terminals

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Technical Specifications

• 2 Network Gateways 100 Mbit 
• Voice encoding functions based on DSP 
• V.24-Interface for testing
• 120-Channell-Version (with PDMX S30807-Q5697-X300)
• Successor of the STMI4 Q2324-X510

Compatibility

• starting at HiPath 4000 V4.0

Scope of delivery

• Board S30810-Q2324-X511 STMI4
• Channel expansion-module S30807-Q5697-X300 PDMX

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

8 trunk circuits for analog exchange/central office connections without PFT(ALUM), with CLIP, 12/16 kHz metering and line reversal detection

• HiPath 3350
• HiPath 3550
• OpenScape X3W
• OpenScape X5W
• S30810-Q2954-X
• 12 month exchange warranty
• Nationwide delivery installation and programming available

Additional Information:

• Item Code: S30810-Q2954-X100
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Analog Subscriber Line Module SLAD4 (4 a/b) for HiPath 3350 / 3550 with CLIP and DTMF-Identification (off V6)

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

• 24 U P0/E-interfaces, from which 16 are master- and 8 are extension-ports
  • Protocol CorNet-T Radio.
  • 4 b-channels each 32 kbit/s voice-transmission
  • 1 D-channel 16 kbit/s signalizing
• Range up to  2000 Meter depending upon the cable type
• 10-pole pin header for GPS-module board SLCM (Subscriber Line CMI Synchronisation Module; S30807-Q6194-*)
• DECT-Standard
• GAP-Standard with Siemens specific protocol-extension

Product Details:

STLS2 ISDN 2 Card, Provides connection for 2 x ISDN 2 trunks (4 channels in total).

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

SLMO8

8 Up0/E - interfaces for system devices from the optiPoint 500 and optiset E product families

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The peripheral module SLAV4 for OpenScape Business X3W / X5W and Octopus F X3W / X5W with 4 analog user interfaces enables the connection of up to 4 analogue terminals.
A code receiver is available for each a / b interface (enables DTMF dialing of analogue telephones), ensuring full accessibility of all connected analogue terminals. The modules support the transmission of the call number of the calling subscriber to the called subscriber line (CLIP) and the connection of external extensions via OPS (Off-Premises-Station) signaling.
Use in:
Openstage X3WOpenstage X5WIdentical Telekom Octopus

Additional Information:

• Delivery Time: Within seven working Days
• Packaging Details: Boxed

Product Details:

Hipath STMI2 package - S30810-Q2316-X10. (Subscriber Trunk Module IP)
Number of channels: 120
The STMI2 module offers the following central and peripheral functions: 
2 network accesses to 10/100 Base-T Fast Ethernet, similar to HiPath RG2500
Speech-coding features (based on DSP), similar to HiPath RG2500
Backplane interface for a standard peripheral board V.24 interface for a test access (service interface)

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Expansion module for connection of 16 digital subscribers (UPo / E) for Hicom 300, Hicom 300 E, Hicom 300 H.

Additional Information:

• Item Code: S30810-Q2144-X
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Sf2x8 Module S30810-q2309-x-6 for Hipath 4000 Communication Server

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Siemens MMCS  module for Hipath 4000

Product Details:

TLANI4 / S30810-Q2953-X for Hipath 3550 & OS Biz X5

Product Details:

Analog subscriber module (8 a/b), for HiPath 3800

The SLMA (Station Line Module Analog) board is the interface between the analog stations and the HiPath 3800 system. One board contains the trunk for 8 station lines. Each of these trunks contains the required feed, ringing and indication circuitry. The front panel of the board contains an LED, which lights whenever a circuit is busy.

For connection of:

• analog phones 
• fax 
• answering machines 
• speakers 
• Doorphone amplifiers 
• announcement devices 
• voicemail

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: BOXED

Product Details:

Analog subscriber module for OpenScape Business X8

• CLIP: displays the number of the caller on special CLIP-capable analog devices;
• for connecting analog telephones, fax, answering machines, speakers, door station amplifiers, announcement devices, voice mail;
• suitable for remote / external extensions
• Mixed operation with SLMA8 / 24 (44V with CLIP) and with SLMA24 (75V without CLIP) possible.
• For EMC reasons, the filler panel front is also required. From OpenScape Business V1 connectable.

Additional Information:

• Item Code: SLMAV8N
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The modules SLMAE (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath 4000

Per a / b interface is a code receiver (DTMF dialing allows analog phones) are available.
Thus, the full accessibility of all connected analog devices is guaranteed.
The transmission of the telephone number of the calling party to the called terminal (Calling Name Identification Presentation CLIP) is supported. 
U.S. only: The connection of external extensions via OPS (off-premises station) signaling is not supported.
The modules generate their own voltages reputation (65 Vrms) and require no external Reputation voltage generator.

For connection of:

• analog phones
• Fax
• answering machines
• speakers
• Doorphone amplifiers
• announcement equipment
• voicemail

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

Repair of Hipath 4000 modules - Repair support available for all Hicom 330 / 350 , Hipath 4000 V1 to V10 Control & peripheral modules 

Product Details:

Hipath 4000 / Openscape Voice

Additional Information:

• Delivery Time: WITHIN SEVEN WORKING DAYS
• Packaging Details: BOXED

Product Details:

Analog Subscriber Line Module (SLAV8) 8 port Analogue ext Card for OSBiz X3W/X5W Only

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The WAML (Access Modul LAN) is an interface card providing connectivity inside a Hicom 300 PBX between the Atlantic LAN (ALAN"), an External LAN (ELAN) and the PCM speech highways. The module number is S30810-Q2205-X.

It manages following data exchanges:

• Atlantic LAN <-> External LAN
• Atlantic LAN <-> PBX
• External LAN <-> PBX

The ALAN interface provides a Western Plug (RJ45) and the ELAN interface provides a Western Plug, a COAX jack and a 15-pt Cannon plug out of which only one may be activated at a time.

The PBX communicates with the WAML via the High Level Data Link Control (HDLC) protocol (the speech-highways are only for data- transfers).

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

OpenScape Business OCCLA UC-Mainboard V3 for X8 DUG664 L30251-U600-G664L30251-U600-G664, S30810-K2966-X200

Product Details:

TMLR S30810-Q2064-X100 

Additional Information:

• Item Code: S30810-Q2064-X100
• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

The SLAS16-module board S30122-Q921-A301 is a subscriber-replacement-board with sixteen analogue interfaces for the connection of system-neutral terminals. 

Compatible with the following systems:

• Hicom 108
• Hicom112
• Hicom118
• Octopus 10A
• Octopus 20A
• Octopus 30A.

Additional Information:

• Delivery Time: Within seven working days
• Packaging Details: Boxed

Product Details:

echnical Documentation

consists of a  MO-drive and a harddisk.
Can be plugged or pulled while under voltage at any time.
However to prevent any memory-data-loss, it is required that the drive is shut off before the module board is removed. 

Compatibility

HiPath 4000

Scope of Delivery

Board S30810-Q2310-X HDMO
MO-drive with IDE-connector
Harddisk with IDE-connector

Additional Information:

• Item Code: S30810-Q2310-X
• Delivery Time: 7 WORKING DAYS