Hexa Communications Private Limited

DESCRIPTION:
Optimux-4E1+4Eth series of Multi E1 & Fast Ethernet Optical Terminal is a product combining of a PDH optical transport system and an Ethernet transceiver.
Optimux-4E1+4Eth can provide up to 4 E1 interfaces and 4 Fast Ethernet interface. The Ethernet interface can be operated in 10M/100M, half duplex or full duplex mode by either auto-negotiation or manual setting.
Optimux-4E1+4Eth is a fiber media transport for 4E1 + 4 x 10/100BaseT transmission. The BNC model provides unbalanced 75 Ohm coaxial connections while the RJ-48C model provides balanced 120 Ohm connections over twisted pair wiring.
All media converters are available with either multi-mode or single-mode optical tranceivers and with connectors for SC, or FC. In single mode they are available in up to 120 km versions reach, which will provide the ability to transmit and receive data using only a single optical fiber pair.
4E1+4Eth Optical multiplexer provides an order-wire for which a standard telephone can be used.
4E1+4Eth Optical multiplexer provides a user RS232 transparent data link with a RJ45 connector.
4E1+4Eth Optical multiplexer possesses complete operation monitoring function. Those indicators include Loss of optical signal, LOF, 10-3, 10-6 bit error rate, Loss of each E1 tributary signal and Ethernet status. Since some overhead bytes are taken as monitoring channel, all alarm and status of Remote can be display locally.
4E1+4Eth Optical multiplexer provides RS232 interface for Network Management. Supported by GUI NMS utility, users can observe the status of Local and Remote, as well as other alarm information unable to be displayed by LEDs in the front panel. Also, with NMS software, user can make certain E1 loop back for testing purpose.  
4 x 10/100 Ethernet ports support intelligent Layer 2 switch features, such as QoS, dot1Q and port based VLAN's, flow control per port with steps n x 32 Kbit/s and more.

FEATURES:
Provides 4 x E1 G.703 transparent transmission over the fiber;
1+0 or 1+1 optical protection optional;
Provide 4 x 100 Mbit/s Ethernet channels, Ethernet speed can be set for each port on based on any multiples of n x 32 Kbit/s;
Provides one RS232 channel for option;
Provide one hotline channel for option (order wire);
Speed of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100km,120KM;
E1 interface code is HDB3; E1 vibration characteristic conforms to ITU-T G.703???G.823 and G.742;
Ethernet port supports full/half duplex, 10M/100M auto-adaptable, throughput is full duplex 100 Mubit/s;
Ethernet port supports dot1Q VLAN setting possibility and port based VLAN's.
Layer2 intelligent switch possibilities for 4 x Ethernet ports
Ethernet packet size supports 1916 byte and 4 Ethernet port could be set seperately, jumbo frames are supported;
Simultaneous 4 E1 & 100 Mbit/s full duplex operation;
LED indicators for alarm function and can monitor remote device status;
Rich DIP switch settings

• Gigaset charger cradle with power supply unit for the Gigaset SL2 Professional

• The XSCSI (S30807-Q6110-X000-C1) is a tape / SCSI storage / backup interface module used in Siemens / Unify / Hicom / PBX systems. It is referred to as XSCSI HD Tape Drive.

• It is meant to provide SCSI / HD tape drive connectivity for system backup, storage or maintenance functions in the communication server / PBX environment.

• The module is sold / refurbished in the spare parts market as “XSCSI HD Tape Drive S30807-Q6110-X000-C1”.

Key features

Flexible mic boom with 360º rotation for optimum positioning

Crystal clear sound

Best-in-class noise-cancelling microphone

HD wideband audio and PeakStop acoustic protection

Kevlar reinforced cable

QuickDisconnect connection

Remote asset management - control company's audio devices from one central point

• It is an analog subscriber line module (“SLA” = Subscriber Line Analog / Subscriber Line Adapter) that provides 8 analog a/b interfaces (i.e. 8 conventional analog telephone / fax / answering-machine / door-intercom etc lines).
  
  The module is used in HiPath / Octopus / other Siemens / Mitel systems. For example: HiPath 3350, HiPath 3550 wall-mounted systems; Octopus F200 / F400.
  
  It is sometimes labelled “8SLA FC” (or “8 a/b”) meaning 8 analog tip/ring lines.

Siemens BNC AMOM Adaptor 850N, part code S30807-K5480-X100.

This adapter is used to connect optical fibers with to DIUN2 and DIUN4 modules in the Hicom300 and Hipath 4000 systems. 

Our reputation of providing excellent products and customer care allows you to buy the Siemens BNC AMOM Adaptor 850N with confidence. All phones and parts come fully tested and with a full one year warranty.

• The CBCC V4 Main Board (part number S30810-Q2935-A201) is a central control board (“CBCC”) for Siemens / Unify HiPath 3350 / HiPath 3550 phone systems.

• “CBCC” typically stands for something like “Central Board, Control & Connectivity (CBCC)” — it is the motherboard that handles core switching/control logic and connects other modules (voice/analog line cards, SLA etc) with the external interface and internal bus.